Tech-L
2 Tons Rosin Press Machine 2.4x4.7 inch 650W 220V 0-260℃
2 Tons Rosin Press Machine 2.4x4.7 inch 650W 220V 0-260℃
Couldn't load pickup availability
- ★【Getting a 25-26% Yield】This heat press machine is easy to use and the average yield rate is around 25-26%. It may vary among different raw material. Perfect for making rosin at home.
- ★【Specifications】- Maximum pressure: 1 Ton; Dual heating plate size: 2.4 x 4.7 inch / 6 x 12 cm; Temperature: 0 - 260℃; Heating plate material: die-cast aluminum; CE Certified
- ★【Double Hot Plate】- Two hotplates are controlled by a digital screen and coated with high temperature resistant anti-adhesion layer which are convenient for cleaning and anti-oxidation.The oil will escape from the sides of the plates.
- ★【LCD Control Panel】- You can set the time and temperature you need on its clearly LCD screen. It will automatically make warning sound after completing. The heating rods have a service life of more than 6,000 Times.
- ★【Portable Heat Press Machine】- Net weight 7.5kg, packing size 23*35*33cm. This hot presser is easy to carry, even can be put in a carry bag, perfect for personal desktop operating or rosin pressing during travel.
Parameters:
Power: 650W
Voltage: 220V
Pressure: 1~2 TON
Weight: 22lb (10Kg)
Packing size: 33*23*40cm (12.6*9.8*16.5inch)
Time range: 0~999s
Working temperature: 32-500°F (0-260°C)
Voltage: 220V
Applications: Extracting rosin; PU leather; Dried flowers and plants.
Digital Control: LCD
Heating plate material: die-cast aluminum
Certifications: CE
Instructions:
1. Plug in the power cord and turn on the power switch.
2. Adjust the operating temperature, press and hold the increase button on the temperature control table until the temperature is added to the desired temperature. Let go, the heating pipe automatically heats up to the set temperature. The recommended temperature is 220 ° F.
3. Wrap the raw material with baking paper and place it in the middle of the heating plate. Press the handle several times to compress the top and bottom heating plates. Stop for 30 seconds and wait for oil to accumulate.
4. The left turn of the bleed valve is a bleed force and must be turned to the right before rolling.
5. Collect the extruded paste with the collection tool.
PLEASE NOTE:
1.Turn off the device when you are not using it and pull the mains plug out of the socket. Always keep children away from the machine.
2. Do not touch the hot plate or the plate cover during operation after pressing.
3. Do not set the temperature higher than 300F (normal application temperature). The recommended temperature is 220 ° F.
Packing list
1 x Spinning Heating Press Machine
1 x User Manual
